China factory Sqn70.624A/B20 CHINAMFG Low Cost Direct Drive Servo Motor Damper Actuator Price Factory 2.5nm Housing 117mm, AC230V for Industrial Burner vacuum pump connector

Product Description

SQN70.624A/B20 CHINAMFG Low Cost Servo Motor Damper Actuator Price Factory 2.5Nm Housing 117mm, AC230V For Industrial Burner

Function:

The function of the actuator:
– Pressure and heat resistant plastic housing design
– Screw terminals
– Maintenance-free gear mechanism with clutch – Built-in positioning markers
– Easy-to-adjust limit switches and auxiliary switches – Integrated circuit loop

Use And Features:

The SQN7…actuator is specially designed to actuate gas fuel valves and dampers for small to medium fuel or Gas burner. So as to
achieve the best mixing ratio of fuel and combustion air. – Connection with P-PI or PID controllers, e.g. RWF40… – Direct connection of different types of combustion controllers, such as LOA.., LMO…, LMG… or LFL… – Connection with 1 or 2 wire controller or 3 position controller

All types of actuators

Impact-proof and heat-resistant plastic housings feature: – Screw terminals for the electrical connections – Maintenance-free gear train, which can be disengaged – Internal position indication – Easy-to-adjust end and auxiliary switches for adjusting the switching points – Integrated electronic circuits

Warning notes

To avoid injury to persons, damage to property or the environment, the following warning notes must be observed! Do not interfere with or modify the actuators!

1. All activities (mounting, installation and service work, etc.) must be performed by qualified staff
2. Before making any wiring changes in the connection area, completely isolate the plant from mains supply(all-polar disconnection). Ensure that the plant cannot be inadvertently switched on again and that it is indeed dead. If not
observed, there is a risk of electric shock hazard
3. Ensure protection against electric shock hazard by providing adequate protection for the connection terminals and by securing the housing cover
4.Each time work has been carried out (mounting, installation, service work, etc.), check to ensure that wiring is in an orderly state
5. Fall or shock can adversely affect the safety functions. Such actuators must not be put into operation, even if they do not exhibit any damage

PRODUCT SPECIFICATIONS

item

value

Condition

New

Warranty

1.5 years

Applicable Industries

Garment Shops, Building Material Shops, Manufacturing Plant, Machinery Repair Shops, Food & Beverage Factory, Farms, Home Use, Retail, Food Shop, Printing Shops, Construction works , Energy & Mining, Food & Beverage Shops, Other, Advertising Company

Weight (KG)

1.5

Showroom Location

None

Video outgoing-inspection

Provided

Machinery Test Report

Provided

Place of CHINAMFG

Germany

Brand Name

CHINAMFG

Type

Gas Burner

Product name

CHINAMFG SQN70.624A/B20 – Damper Actuator

Model

SQN70.624A/B20

Brand

CHINAMFG

Color

Silvery White

Voltage

AC230V

TORQUE

2.5NM

Delivery time

payment after about 2 days

After Warranty Service

Video Technical Support

Shipping Term

DHL/UPS/Fedex/TNT

Application/Usage

Gas Burners Industrial Accessories

SQN70.624A/B20 CHINAMFG Low Cost Servo Motor Damper Actuator Price Factory 2.5Nm Housing 117mm, AC230V For Industrial Burner

Detailed Photos

 
 

nsmission as mounting surface – Easy and reliable installation through mounting holes

 

Recommend Products

 

 

SQN70.624A/B20 CHINAMFG Low Cost Servo Motor Damper Actuator Price Factory 2.5Nm Housing 117mm, AC230V For Industrial Burner

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Usage: Hydrogen, Nitrogen, Ng and LPG
Purpose: Control Gas
Parts: Damper Actuator
Application Fields: Industrial Gas Burner
Noise Level: Low
Machine Size: Medium
Samples:
US$ 178/Piece
1 Piece(Min.Order)

|

Customization:
Available

|

induction motor

What factors should be considered when selecting an AC motor for a particular application?

When selecting an AC motor for a particular application, several factors need to be considered to ensure the motor meets the requirements and performs optimally. Here are the key factors to consider:

  1. Power Requirements: Determine the power requirements of the application, including the required torque and speed. The motor should have adequate power output to meet the demands of the specific task. Consider factors such as starting torque, running torque, and speed range to ensure the motor can handle the load effectively.
  2. Motor Type: There are different types of AC motors, including induction motors, synchronous motors, and brushless DC motors. Each type has its own characteristics and advantages. Consider the application’s requirements and factors such as speed control, efficiency, and starting torque to determine the most suitable motor type.
  3. Environmental Conditions: Assess the environmental conditions in which the motor will operate. Factors such as temperature, humidity, dust, and vibration levels can impact motor performance and longevity. Choose a motor that is designed to withstand the specific environmental conditions of the application.
  4. Size and Space Constraints: Consider the available space for motor installation. Ensure that the physical dimensions of the motor, including its length, diameter, and mounting arrangement, are compatible with the available space. Additionally, consider the weight of the motor if it needs to be mounted or transported.
  5. Efficiency: Energy efficiency is an important consideration, as it can impact operational costs and environmental sustainability. Look for motors with high efficiency ratings, which indicate that they convert electrical energy into mechanical energy with minimal energy loss. Energy-efficient motors can lead to cost savings and reduced environmental impact over the motor’s lifespan.
  6. Control and Speed Requirements: Determine if the application requires precise speed control or if a fixed speed motor is sufficient. If variable speed control is needed, consider motors that can be easily controlled using variable frequency drives (VFDs) or other speed control mechanisms. For applications that require high-speed operation, select a motor that can achieve the desired speed range.
  7. Maintenance and Serviceability: Assess the maintenance requirements and serviceability of the motor. Consider factors such as the accessibility of motor components, ease of maintenance, availability of spare parts, and the manufacturer’s reputation for reliability and customer support. A motor that is easy to maintain and service can help minimize downtime and repair costs.
  8. Budget: Consider the budget constraints for the motor selection. Balance the desired features and performance with the available budget. In some cases, investing in a higher quality, more efficient motor upfront can lead to long-term cost savings due to reduced energy consumption and maintenance requirements.

By carefully considering these factors, it is possible to select an AC motor that aligns with the specific requirements of the application, ensuring optimal performance, efficiency, and reliability.

induction motor

How do AC motors contribute to the functioning of household appliances?

AC motors play a crucial role in the functioning of numerous household appliances by converting electrical energy into mechanical energy. These motors are used in a wide range of devices, powering various components and performing essential tasks. Let’s explore how AC motors contribute to the functioning of household appliances:

  • Kitchen Appliances: AC motors are found in various kitchen appliances, such as refrigerators, freezers, dishwashers, and blenders. In refrigerators and freezers, AC motors drive the compressor, which circulates the refrigerant and maintains the desired temperature. Dishwashers use AC motors to power the water pumps, spray arms, and the motorized detergent dispenser. Blenders utilize AC motors to rotate the blades and blend ingredients.
  • Laundry Appliances: AC motors are integral to laundry appliances like washing machines and clothes dryers. Washing machines rely on AC motors to power the agitator or the drum, facilitating the washing and spinning cycles. Clothes dryers use AC motors to rotate the drum and operate the blower fan, facilitating the drying process.
  • Vacuum Cleaners: Vacuum cleaners utilize AC motors to generate suction and drive the motorized brush or beater bar. These motors power the fan or impeller, creating the necessary airflow for effective cleaning.
  • Fans and Air Circulation: AC motors are employed in various types of fans, including ceiling fans, table fans, and pedestal fans. These motors drive the fan blades, producing airflow and facilitating air circulation to provide cooling or ventilation in rooms. Additionally, AC motors power exhaust fans used in kitchens, bathrooms, and range hoods to remove odors, smoke, or excess moisture.
  • Air Conditioning and Heating Systems: AC motors are critical components in air conditioning and heating systems. They power the compressor, condenser fan, and blower fan, which are responsible for circulating refrigerant, dissipating heat, and delivering conditioned air throughout the house. AC motors enable the regulation of temperature and humidity levels, ensuring comfort in residential spaces.
  • Garage Door Openers: AC motors are utilized in garage door openers to drive the mechanism responsible for opening and closing the garage door. These motors generate the necessary torque to lift or lower the door smoothly and efficiently.
  • Other Appliances: AC motors are also found in a variety of other household appliances. For instance, they power pumps in water heaters, swimming pool filters, and sump pumps. AC motors are used in dehumidifiers, humidifiers, and air purifiers to drive the fans and other internal components. They are also present in audiovisual equipment, such as DVD players, record players, and fans used for cooling electronics.

In summary, AC motors are essential components in household appliances, enabling their proper functioning and delivering the mechanical energy required for various tasks. From kitchen appliances to laundry machines, fans, air conditioning systems, and more, AC motors provide the necessary power and functionality to enhance our daily lives.

induction motor

What are the main components of an AC motor, and how do they contribute to its operation?

An AC motor consists of several key components that work together to facilitate its operation. These components include:

  1. Stator: The stator is the stationary part of an AC motor. It is typically made of a laminated core that provides a path for the magnetic flux. The stator contains stator windings, which are coils of wire wound around the stator core. The stator windings are connected to an AC power source and produce a rotating magnetic field when energized. The rotating magnetic field is a crucial element in generating the torque required for the motor’s operation.
  2. Rotor: The rotor is the rotating part of an AC motor. It is located inside the stator and is connected to a shaft. The rotor can have different designs depending on the type of AC motor. In an induction motor, the rotor does not have electrical connections. Instead, it contains conductive bars or coils that are short-circuited. The rotating magnetic field of the stator induces currents in the short-circuited rotor conductors, creating a magnetic field that interacts with the stator field and generates torque, causing the rotor to rotate. In a synchronous motor, the rotor contains electromagnets that are magnetized by direct current, allowing the rotor to lock onto the rotating magnetic field of the stator and rotate at the same speed.
  3. Bearing: Bearings are used to support and facilitate the smooth rotation of the rotor shaft. They reduce friction and allow the rotor to rotate freely within the motor. Bearings are typically located at both ends of the motor shaft and are designed to withstand the axial and radial forces generated during operation.
  4. End Bells: The end bells, also known as end covers or end brackets, enclose the motor’s stator and rotor assembly. They provide mechanical support and protection for the internal components of the motor. End bells are typically made of metal and are designed to provide a housing for the bearings and secure the motor to its mounting structure.
  5. Fan or Cooling System: AC motors often generate heat during operation. To prevent overheating and ensure proper functioning, AC motors are equipped with fans or cooling systems. These help dissipate heat by circulating air or directing airflow over the motor’s components, including the stator and rotor windings. Effective cooling is crucial for maintaining the motor’s efficiency and extending its lifespan.
  6. Terminal Box or Connection Box: The terminal box is a housing located on the outside of the motor that provides access to the motor’s electrical connections. It contains terminals or connection points where external wires can be connected to supply power to the motor. The terminal box ensures a safe and secure connection of the motor to the electrical system.
  7. Additional Components: Depending on the specific design and application, AC motors may include additional components such as capacitors, centrifugal switches, brushes (in certain types of AC motors), and other control devices. These components are used for various purposes, such as improving motor performance, providing starting assistance, or enabling specific control features.

Each of these components plays a crucial role in the operation of an AC motor. The stator and rotor are the primary components responsible for generating the rotating magnetic field and converting electrical energy into mechanical motion. The bearings ensure smooth rotation of the rotor shaft, while the end bells provide structural support and protection. The fan or cooling system helps maintain optimal operating temperatures, and the terminal box allows for proper electrical connections. Additional components are incorporated as necessary to enhance motor performance and enable specific functionalities.

China factory Sqn70.624A/B20 CHINAMFG Low Cost Direct Drive Servo Motor Damper Actuator Price Factory 2.5nm Housing 117mm, AC230V for Industrial Burner   vacuum pump connector	China factory Sqn70.624A/B20 CHINAMFG Low Cost Direct Drive Servo Motor Damper Actuator Price Factory 2.5nm Housing 117mm, AC230V for Industrial Burner   vacuum pump connector
editor by CX 2024-04-22